Sinn direct or Neil at chrono master I guess would be your best bet
Hi,
Having recently purchased a Sinn 857 UTC (2009 Model) with Tegimented Bracelet from SC, I've promptly broken two of the linking bolts/threaded tubes by over tightening whilst lengthening the bracelet .
Does anyone know where I can purchase replacements?
I've had a Google to no avail & would be most grateful if anybody could point me in the right direction. I should also mention, I did find a general suppliers called Cousins but got rather lost amongst the array of parts so a direct link would probably be needed for a watch numpty such as myself.
The parts I need are the long tube with allen head one end/internal thread the other & the threaded bolt with allen head for opposite end. (Hope that makes sense).
Below is a picture of the broken part, the threaded bolt on the right should be longer as this is the part I managed to snap off inside the threaded tube.
Thanks in advance for your help.
[IMG][/IMG]
Last edited by wads; 26th June 2018 at 14:14.
Sinn direct or Neil at chrono master I guess would be your best bet
Good luck everybody. Have a good one.
Without a doubt Sinn is who you have to contact. Non-OEM replacements might be found, Cousins has some, but not sure if they'll fit.
Could maybe try a wtb for a couple of bracelet links
Good luck everybody. Have a good one.
Thanks for all the information guys, much appreciated.
I’ll try Neil at Chronomaster as suggested as he’s in th U.K. Failing that I’ll email Sinn direct.
Just some feedback after all the kind advice received here.
I rang Neil at Chronomaster first who was helpful but anticipated a four week turnaround which was a bit too long for me to wait.
I then emailed Page & Cooper who didn't bother to respond in any way.
Next I emailed Sinn direct in Germany who sent me the parts FOC within a few days.
I couldn't have wished for a better service from a manufacturer, very pleased indeed.
Thanks again for your help chaps.